Florida Bat Control, LLC

(888) 711-6269 

Professional Bat Removal Company

Getting rid of bats is not an easy task if you do not have experience. We recommend having a bat removal professional (not a pest control company) remove your bats safely and humanely. Typical bat removal projects are not DIY projects. For more information on bat removal and the live bat exclusion process contact us today!

Now You See Where Bats Are Removed From. Now This is How We Get Rid of Bats

The Live Bat Exclusion Method is a Five Step Process

  1. Inspecting the home or building: Often the most important part of the process. Knowing where the bats are getting in, the damages they have done is the first step in a successful bat exclusion. You must do a complete inspection on the home. This includes a perimeter check of the home, roof inspection, and attic inspection. 
  2. Sealing the home: You must seal all other possible entry points of the home the bat are NOT USING. This is to prevent the bats from exiting the home through their main entry point and swooping around to find another way into their roost. Bats are not chewers, but they will find there way back into the home or attic, if every other gap a 1/2 or larger isn't properly sealed. Screening, caulking, and roof sealants are good ways to proof the home. 
  3. Installing the exit doors: This a critical step in solving your bat problem. You must install an exit device at all of the bats entry points to allow them to freely exit without being trapped in the home. The bats will usually leave about 15 minutes before sunset and come back 15 minutes before sunrise. Exit devices can be made out of netting or bat tubes. You have to leave the exit devices or one way bat doors up for more than one night. Usually 3 days to a week works. Bats don't all leave in one night. 
  4. Re-inspection: When the devices are installed, the home is sealed up and you have waited long enough for ALL of the bats to exit, it's time to remove the one way bat doors. When doing this check all of your other repairs to make sure they have help up. After you take down the bat doors seal up the entry point for good. Wala, no more bats!
  5. Clean-up and Restoring the Attic: Some homes need to be cleaned up once the bats are gone. If the bats have left piles of bat guano (their feces) in your attic it is a good idea to clean it up. This may require removing old insulation, sanitizing, deodorizing, and re-insulating your attic. We carry an 18 horse power insulation vacuum to remove bat guano and damaged insulation. 

Florida Bat Removal and Excluding the Bats

Florida bat removal is our specialty. Getting rid of bats from homes and attics is what takes up about 100% of our time.  We are constantly studying and researching how to get rid of bats, bat species in Florida, and bat habitats.  Bat Removal is only one technique to get rid of bats.  Bats tend to roost in high sheltered areas like eaves, vents, and shingles. Bat removal can be done by hand. For example a bat may be hanging on a blind or a curtain in a home, so we go in and grab it by hand and take it away.  Bat removal should never be done by bat trapping, poisoning, exterminating, or by using bat repellents.  There is only one correct way to remove bats and that is by a live bat exclusion. 

Here are some areas bats need to be removed from...

  • Eave trough 

  • Gable vents

  • Under shingles

  • In soffits

  • Under ridge vents

  • Hanging above door

Bat Removal from Eaves

One of the number one entry points for bats is through the eaves or soffits.  Generally this is at the point of intersection where 2 roof lines come together. Often there are construction gaps because the roofers leave openings to lay the shingles under so no bare wood is showing.  Well in reality they are suppose to be back flashed but 99% of the time they are not.  Bat removal from eaves is done with an exclusion tube or bat netting. Bats will fly out but not be able to return. 

Bat Removal from Gable Vents

If eaves are the number one point of entry then gable vents are a close second.  Bats will land on the louvers and hang on the interior screen.  Some of the older homes may not even have screen behind the louvers.  If there is no screen the bats have easy access into your attic.  Even if the vents are screened doesn't mean the bats can not gain entry into the attic.  Bats will roost on the thin window screen behind the louvers and rot the screen away.  Once the feces and urine build up it will eat right through the screen. As the air flow moves through the gable it will bust the screen wide open. Thus bats have free opportunity to fly right into your attic.  

Bats are removed from gables a few different ways...
  1. You may either remove bats by hand if the louvers are far enough apart. You have to wear gloves and be comfortable on a ladder.  This really isn't a recommended  way to get rid of the bats from the gable vents.  

  2. If the bats in the gable vent is a recent problem and the screen from the inside is intact you may want to consider this option: From inside the attic spray water onto the bats. The bats will fly out. Once they are out screen over top of the lovers to prevent the return.  Its also important to make sure any other openings on your home are sealed as well. 

  3. The third option and most effective is to install screen over top of the louvers where the bats are roosting. Leave one corner open so you can install an exclusion device. The bats will fly out but not get back in. You still have to make sure the rest of the home is sealed tight.

Bats Under shingles

We find bats roosting under shingles all the time.  Shingles get nice and warm for the bats to live under during the summer.  Bats can be removed from underneath shingles by hand but most of the time they're hard to get at.  We have been on bat removal projects with slate top shingles, cedar shake shingles, steal roofs, and California style roofs.  

  • Slate Rock: We once worked on Monastery home in Tampa with over 10,000 bats living it.  This was a difficult project but nevertheless one we were willing to take on.  We used a roofing caulk to seal around all of the tiles.  Not an easy task but one that had to be done.  

  • Cedar shake: style homes can be difficult as well.  Generally it is the ridge cap that possesses the most trouble.  Cedar shake ridge caps are mostly open to the outside with no screen.  It's import for these roofs to ventilate properly.  We screen all the caps from inside the attic using a 1/4" hardware cloth. But before we can do this we have to lay bat netting over top of the ridge cap so the bats can get out but not return. A lot of homes in Naples, FL have this style roof. 

  •  Steal roof tops: are hard to work on. They are very slippery and require advanced safety equipment.  Many times the bats will enter or roost under the grooves where the steal roof pieces meet with one another.  A lot of times we seal in between all the grooves so the bats can not enter into the attic or home. 

  • Cailifornia Style: In Sarasota, FL we removed bats from this style home.  The bats on these roofs will enter through the eaves, but mostly through the ridge vents.  Here we have to lay bat netting over the vents so the bats can get out but not back in. Once the bats are excluded all of the ridge vent caps have to be undone and screened underneath.  Once we screen underneath them we nail the caps back on. 

  • Spanish and Barrel Tile Roofs: A very popular roof in Florida. This is probably the most difficult task we encounter in Florida. Every last shingle must be sealed off to prevent the entry of bats. This can get pricey. 

Bat Removal From Ridge Vents

In recent years we have found ridge vents to be a major problem when dealing with bats.  There are different styles of ridge vents. Metal ridge caps, plastic ridge caps, tile or interwoven style.  

  • Plastic ridge caps: may be the best for airflow but they are absolutely horrible when trying to prevent bats from entering the attic.  Plastic ridge caps like cobra style can be effective bat proofing vents if installed properly. There must be a screen underneath and the gutter edge of the vent should be secured to the roof line.  If these caps are cut too long they will present a wave to them allowing for bats to enter through open areas in the ridge cap. Plastic also heats up on the hottest days of the year forcing the plastic to return to its original state which is flat. Roof tops are not flat and neither should the ridge caps.  

  • Metal ridge caps: will lose the rubber end pieces letting the bats right in through the end caps.  

  • Interwoven ridge caps: Maybe the best type of ridge cap to use to deter bats would be the interwoven style.  Maybe not the best for ventilation but definitely the best to keep bats out. Unless the cap is damaged bats can not get through them. 

Bat removal from ridge vents is done through an exclusion process.  The entire ridge vent is sealed, yet still open for venting.  One way doors are installed to exclude any preexisting bats from their roost.  One way doors are left up until all bats are excluded. Once the bats are gone the rest of the ridge vent can be fixed.

Is there a bat hanging over your front door?

Call an expert to remove it by hand.  If this isn't an option for you then try a couple of techniques to keep the bats from hanging.  Tape or staple aluminum foil or metal flashing to the area where they are hanging. The bats will try to hang on it but wont be able to grip onto it. Also when they give off their high frequency pitch it will reflect right off of the aluminum and deter them from landing.  Battery operated motion lights sometimes do the trick. The bats fly in and the light kicks on. Bats can be sensitive to light and when it flashes in their eyes they will turn around and fly else where.  Another thing you may try is cleaning the areas where the bats are hanging with ammonia. Not only will it clean off the urine staining it will get rid of the odor. Bats are attracted to there odor they leave behind.  

We provide bat removal services through out the state of Florida.  We can handle all situations when it comes to bat removal. Removing bats from vents, shingles, eaves, and door ways are our specialty.

Cleaning up the Mess the Bats Left Behind

Excluding the Bats From the Home

Bat Inspection of the Home and Attic

Florida Bats in the Attic

Live Bat Exclusion

So you find out you have bats in the attic. Did you see a bat fly out? Did a bat get into your home? Did you see them in the attic? One or all of these ways is probably how you found out you have bats in the attic. NO NEED TO PANIC! Bats are very beneficial and great for our environment. They serve a large purpose in our ecosystem. That being said bats are not good to have in your home or attic. DON'T WORRY WE CAN HELP! Bats do control the insect population and help the spread of West Nile Disease. With bats eating three times their body weight there is a lot of digesting of food. Bats can't control their bowel movements like we can therefore your attic may pile of with bat guano (their feces). This can be bad if not taken care of immediately or cleaned up by a professional. Most home owners can catch their bat problem before it gets out of hand, but others may not realize they have bats or don't care. A bat colony over time can do great damage to your attics insulation, drywall and structure. Bat guano can carry fungi spores and when inhaled can be harmful to humans. Lung infection diseases such as histoplasmosis can make you sick. For more information on diseases bats can cause, visit our diseases caused by bats page. Now that you realize you have bats in the attic, its time to get rid of them.